Security Code; Keypad Lock; Power Save - LG chocolate KU800 Benutzerhandbuch

3. Enter the new PIN code, and press
11:30
AM
.
4. Enter the new PIN code once again, and press
.
If the PIN code is different from that of step 3,
]
the procedure is restarted from step 3.
5. When the PIN code is changed properly, a
Changed message is displayed. If you enter an
incorrect PIN code in step 2, the procedure is
restarted from step 2, and the number of
attempts you have left to enter the number
decreased by 1.
6. Press in the PIN code entry window to
return to the previous step.
Note
Three incorrect PIN code entries in the PIN
]
code entry window would invalidate the PIN
code. In this case, you have to enter the PUK
(PIN Unblock Key) code to configure the PIN
code again. The maximum number of times you
may enter the PUK code is 10. (Note: If you
enter an incorrect PUK code10 times, the
USIM card will be blocked and must be
replaced.)
PIN2 code
PIN2 is the abbreviation for Personal
Identification Number 2, and is used to
restrict use by unauthorised users as with the
PIN. The PIN2 code change procedure is the
same as the one for the PIN code. 3
incorrect PIN2 code entries would invalidate
the PIN2 code. In this case, you have to
enter the PUK2 code in order to use the
PIN2 code again. The maximum number of
times you may try to enter the PUK2 code is
10, like PUK1. 10 incorrect PUK2 code
entries would invalidate the PIN2 code.

Security code

The security code is used to change the mobile
phone password. The maximum number of attempts
to enter the security code is not limited as it is with
PIN and PIN2.

Keypad lock

If you select Off, the keypad can be activated only
when the slide is open. If you select On, you can
activate the keypad by pressing
of the phone.

Power save

Decide whether to activate the power save mode or
not.
on the left side
(Menu #.1.5)
65