Hama RC 750 Bedienungsanleitung Seite 5

4. Getting Started
• Open the battery compartment (8), insert two AA batteries with the correct polarity and close the
battery compartment(8).
5. Operation
Note
Hold down the button (5) or the
5.1. Automatic date/time setting using the DCF signal
• Once you have inserted the batteries, the display is switched on, an acoustic signal sounds and the alarm
clock automatically starts searching for a DCF radio signal. During the search, the radio icon
This process can take 3 to 5 minutes.
• When the wireless signal is received, the date and time are automatically set.
Display
Display flashing
Displayed continuously
Displayed continuously
Displayed continuously
• Press and hold the wave °C/°F button (3) for approx. 3 seconds to start a manual search for the DCF radio
signal.
Note – Manual search
• The manual search is automatically aborted after 3-5 minutes.
• Using the wave °C/°F button (3) frequently will drain the battery. We recommend only using this
function to seek out an optimal location for the device.
4
button (6) to select the values faster.
/
Searching for the DCF signal
Active
Successful – signal is being received
Success – weak signal reception
Inactive – no signal reception
will flash.