Turning Off The Microphone (Mute); Pause Key; Conference Call (Two Internal Dect Handsets And One External Caller); Locating A Misplaced Handset (Paging) - Topcom butler 1200 Bedienungsanleitung

Butler 1200/1210

4.9 Turning off the microphone (mute)

It is possible to turn off the microphone during a call by pressing the Delete/Mute key
you can speak freely without the caller being able to hear you.
• You are on the phone. The Line/Charge indicator
the Call symbol
• Press the Delete/Mute key
• The symbol 'X' appears on the display (
• When you want to resume the conversation, press the Delete/Mute key
• The symbol 'X' disappears from the display (
hear you again.

4.10 Pause key

If you dial a telephone number and you would like to add a pause to this number, press the
Pause key at the desired place in the number.
When you call this number, this pause (3 seconds) is automatically included.

4.11 Conference call (two internal DECT handsets and one external caller)

You can have a telephone conversation with one internal and one external caller at the same
time.
• While on the line with an external caller, press the Programming key
• 'INTERCOM' appears on the display.
• Press the Programming key
• The external call is now on hold.
• 'INT' appears on the display.
• Dial the number of the handset you would like to include in the call.
• Once the handset dialled is answered, keep the '#' key pressed for 3 seconds.
• 'CONFERENCE' appears on the display.
• Now you are connected to one external and one internal caller (conference call).

4.12 Locating a misplaced handset (paging)

If you cannot find the handset, briefly press the Paging key
All handsets subscribed with the base unit will sound a signal so you can locate the misplaced
handset. To stop the signal, briefly press the Line key

4.13 Using the alphanumeric keypad

Use the alphanumeric keypad to type text. To select a letter, press the corresponding key. E.g.
if you press the alphanumeric key '5', the first character (j) appears on the display. Press it
repeatedly to select other characters from this key.
Press the '2' key twice to select the letter 'B'. If you would like to select both 'A' and 'B' after
each other, first press the '2' key once to select 'A', wait 2 seconds until the cursor moves to the
next position and then press the '2' key twice to select 'B'. You can delete characters mistakenly
typed by using the Delete key
move the cursor by pressing the Up and Down keys
appears on the display.
to turn off the microphone.
).
.
. The character in front of the cursor will be deleted. You can
(LED) on the base unit will blink and
). The person on the other end of the line can
on the base unit.
on the handset.
.
58
. Now
again.
.