Environmental And Disposal Information; Conformity Information - Zoofari ZTPS 6 A1 Bedienungsanleitung Und Serviceinformationen

Zoofari ZTPS 6 A1

You can wipe the housing of the pet hair clippers with a slightly damp cloth, but never use
corrosive cleaners.

Remove hairs from the shaving head only with the cleaning brush (8). The shaving head is set
by the manufacturer to produce an optimal cutting result. For this reason, the cross-head
screws on the shaving head must not be loosened.

The shaving head must not be cleaned with water or other liquids, except medical alcohol!

If the device is used regularly, the shaving head should be oiled occasionally. Use the
supplied blade oil (7) for this purpose. Spread a maximum of 1 or 2 drops of blade oil (7)
on the blade area of the shaving head. Remove excess oil with a dry cloth.

Store the device in a dry and dust-free place, preferably in the storage case (10). Place the
blade cover over the shaving head when storing the device. You also have the option of
hanging up the pet hair clippers (1) via the loop attached to the cable.

Environmental and disposal information

When this symbol appears on a product, this indicates that the product is subject to
the European Directive 2012/19/EU. All electrical and electronic devices must be
disposed of separately from household waste at designated disposal points.
Disposal of old devices in this manner will prevent harm to the environment and
human health hazards. For further information regarding disposal of old devices in
accordance with the directive, contact your local authorities, waste disposal office
or the shop where you bought the device.
Dispose of the packaging in an environmentally compatible manner. Cardboard can be put out for
municipal paper collections or brought to public collection points for recycling. Films and plastic
used for packaging the device are collected by your local disposal services and disposed of in an
environmentally compatible manner.

Conformity information

This device meets the basic requirements and other relevant regulations of the
EMC Directive 2004/108/EC, the ErP Directive 2009/125/EC and the Low
Voltage Directive 2006/95/EC. The Declaration of Conformity can be found at
the end of this manual.
10 - English