Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions for
use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.
Package contents
1 x feeding dish frame, disassembled (1–7)
2 x bowl (8)
6 x rubber ring (9)
1 x hex key
1 x instructions for use
1 x quick guide
Technical data
Frame dimensions: approx. 42 x 27 x 47cm
(D x W x H)
Bowl dimensions: 23 x 6.8cm (Ø x H)
Date of manufacture (month/year):
10/2021
Intended use
This product is intended exclusively for animals
and serves as a bowl for animal feed.
The product is suitable for dry and wet feed. The
product is for private use and is not intended for
commercial use.
Safety information
Important: read these instructions for
use carefully and keep them in a safe
place!
Life-threatening hazard!
• Never leave children unattended with the
packaging materials. There is a risk of
suffocation.
• The product is not a toy or a climbing
apparatus! Ensure that persons, especially
children, do not pull themselves up on the
product or stand on it. The product can tip
over.
6
GB/IE
Risk of injury!
• Ensure the product is properly stabilised
before it is used!
• Place the product on a level surface.
• The product may only be used for its intended
purpose.
• Not a toy for children!
• Keep away from children!
• Only use under supervision.
• Check regularly to make sure all screws are
tight!
• Check the product for damage or wear
before each use. Only use the product if it is in
perfect condition!
Assembly (Fig. A)
1. Assemble the product as shown in Fig. A.
Note: attach the enclosed rubber rings (9) to
the feeding bowl holder (3) to secure the bowls
(8) in the holder.
2. Adjust the product to the desired height using
the locking screw (5).
3. Place the product on a level and solid surface.
Note: compensate for an uneven floor by
adjusting the rubber feet.
Use
You can remove the bowls (8) from the holder
(3) by undoing the locking screw (5) on the
locking mechanism (4) and sliding it up.
Note: when replacing the bowls, ensure they
are securely in place.
Storage, cleaning
When not in use, always store the product
clean and dry at room temperature. Clean only
with water and a mild detergent, and wipe dry
afterwards with a cloth.
IMPORTANT! Never clean the product with
harsh cleaning agents.
The bowls are dishwasher-safe.
Werbung
Inhaltsverzeichnis
