General Information; General Safety Information - Gemü 800 Original Einbau- Und Montageanleitung

Contents
1 General information ..........................19
2 General safety information ...............19
2.1 Information for service
and operating personnel ............20
2.2 Warning notes ............................20
2.3 Symbols used ............................21
3 Correct use ........................................21
4 Scope of delivery ..............................21
5 Technical data ....................................21
6 Order data ..........................................22
7 Transport and storage ......................24
7.1 Transport ...................................24
7.2 Storage ......................................24
8 Functional description ......................24
9 Construction ......................................24
10 Installation .........................................25
10.1 Remove transportation
protection ...................................25
10.2 Installation options .....................25
10.3 Inlet and outlet distances ...........26
10.4 Pipelines with smaller
and larger diameters ..................26
10.5 Regulating units .........................27
10.6 Flowmeter installation ................27
10.7 Mounting limit switches
or instrument sensor ..................29
11 Commissioning .................................29
11.1 Prior to commissioning ...............29
11.2 Commissioning procedure .........29
12 Operation ...........................................30
13 Servicing ............................................30
13.1 Inspection ..................................30
13.2 Cleaning .....................................31
13.3 Spare parts ................................31
14 Disposal .............................................33
15 Returns ...............................................33
16 Troubleshooting / Fault clearance ...34
17 EU Declaration of conformity ...........35
1

General information

Prerequisites to ensure that the GEMÜ
fl owmeter functions correctly:
Correct transport and storage

Installation and commissioning by trained

personnel
Operation according to these installation,

operating and maintenance instructions
Recommended maintenance

Correct installation, operation, servicing
and repair work ensure faultless fl owmeter
operation.
The descriptions and instructions
apply to the standard versions.
For special versions not described
in these installation, operating
and maintenance instructions the
basic information contained herein
applies in combination with any
additional special documentation.
All rights including copyright
and industrial property rights are
expressly reserved.
2

General safety information

The safety information in these installation,
operating and maintenance instructions
refer only to the individual fl owmeter itself.
Potentially dangerous conditions can arise
in combination with other plant components,
which need to be considered on the basis of
a risk analysis.
The operator is responsible for the
production of the risk analysis and for
compliance with the resulting precautionary
measures and regional safety regulations.
19 / 36
800, 850