Dedicated Functions; Mecablitz 36 Af-4 C; Mecablitz 36 Af-4 N - Metz MECABLITZ 36 AF-4 Minolta Bedienungsanleitung

AGE! There are no components inside the flashgun that
can be repaired by a layman.
• When taking a series of flash shots at full light output and
fast recycling times as provided by NiCad battery opera-
tion, make sure to observe an interval of at least 10 mi-
nutes after 15 flashes, otherwise the flash unit will be
overloaded.
• The mecablitz may only be used in combination with a
camera-integrated flash unit if the latter can completely
be folded out!
• Quick changes in temperature may cause condensation.
Therefore give the flashgun time to acclimatize!
2. Supported dedicated functions

2.1 mecablitz 36 AF-4 C

• Flash ready indication in camera viewfinder
• Automatic flash sync speed
• TTL flash control
• E-TTL flash control
∆ Manual TTL-flash exposure correction
∆ Flash exposure storage FE
x AF measuring beam control
• Programmed auto flash mode
• Wake-up function for flash unit
∆ = Dedicated function is performed by the camera or must be
set on the camera.
x = Some cameras only support the AF illuminator integrated
in the camera.

2.2 mecablitz 36 AF-4 N

• Flash ready indication in camera viewfinder
• Automatic flash sync speed
• TTL flash control
• i-TTL flash control
• Automatic TTL flash exposure correction
∆ Manual TTL-flash exposure correction
71