Sony CDX-R450 Bedienungsanleitung Seite 7

G DSO button 2
To select the DSO mode (1, 2, 3 or OFF).
The larger the number, the more enhanced
the effect.
H OFF button
To power off; stop the source.
I SEEK +/– button
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
J
(front panel release) button 4
K SOURCE button
To power on; change the source (Radio/CD/
MD* 1 /AUX).
L MODE button 8, 12
To select the radio band (FM/MW/LW)/
select the unit* 2 .
M RESET button (located behind the front
panel) 4
N Number buttons
CD/MD* 1 :
(1)/(2): GP*
3 /ALBM*
To skip groups/albums (press); skip
groups/albums continuously (press and
hold).
(3): REP 8
(4): SHUF 8
(5): BBE MP*
6 3
To activate the BBE MP function, set
"BBEMP-ON." To cancel, set
"BBEMP-OFF."
(6): PAUSE*
6
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
O AF (Alternative Frequencies)/TA
(Traffic Announcement) button 9
To set AF and TA/TP in RDS.
P SENS/BTM button 8
To improve weak reception: LOCAL/MONO
(press); start the BTM function (press and
hold).
4 –/+* 5
Q PTY (Programme Type) button 10
To select PTY in RDS.
R Receptor for the card remote
commander
S Disc slot 5
To insert the disc.
T Z (eject) button 5
To eject the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
wa < (.)/, (>) buttons
To control CD/radio, the same as (SEEK)
+/– on the unit.
ws M (+)/m (–) buttons
To control CD, the same as (2)/(1) on the
unit.
wd SCRL (scroll) button 8
To scroll the display item.
wf Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected.
*2 When a CD/MD changer is connected.
*3 When an ATRAC CD is played.
*4 When an MP3/WMA is played.
*5 If the changer is connected, the operation is
different, see page 12.
*6 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 15.
7