Teesa TSA3510 Bedienungsanleitung Seite 10

10
• Do not attempt to repair this appliance yourself, only authorized and qualified personnel
may repair this device.
• Producer is not responsible for damages caused by inappropriate handling
and using of the device.
1. Insert the blender stick onto the motor unit until it locks.
2. Adjust rotation speed and press standard / turbo speed switch.
3. Use the blender no longer than 1 minute.
4. Unplug, then press the ejection buttons to detach motor unit from blender stick.
1. Carefully remove the plastic cover from the blade. Be careful, the blade is very sharp!
EN
Always hold it by the upper plastic part.
2. Place the blade on the center pin of the chopper bowl. Press down the blade and lock
bowl. Always place the chopper bowl on the anti-slip base.
3. Place the food in the chopper bowl.
4. Place the chopping bowl lid on the chopper bowl.
5. Place the motor unit on the chopper bowl lid until it locks.
6. Press switch to operate the chopper. During processing, hold the motor unit with on
hand and the chopper bowl the other.
7. After use, Unplug then press the ejection button to remove the motor unit.
8. Then remove the chopping bowl lid.
9. Carefully take out the blade.
10. Remove the processed food from the chopper bowl.
HAND BLENDER OPERATION
CHOPPER OPERATION
Owner's manual