Cleaning And Storage; Technical Data - BOMANN DB 761 K Bedienungsanleitung

Vertical Steam
This can be used to produce a jet of steam in a vertical direction.
Note: To avoid excess water leaking from the soleplate do not operate the steam burst for
more than 5 seconds without interruption.
Self-Cleaning (Self-Clean)
1. Half fi ll the water tank with water.
2. Heat the machine up to its maximum temperature. After the control lamp goes off
remove the machine from the mains supply.
3. Now hold the iron horizontally over a sink. Keep the „self clean" button pressed down.
Now rock the device backwards and forwards until the tank is empty. The „self clean"
button jumps back automatically.
4. Place the machine back on its stand and heat it up again. To clean the base now iron
over a clean cotton cloth.
• Always remove the mains lead before cleaning!
• Clean the casing with a slightly damp cloth.
• Clean the iron with a slightly humid cloth.
• Always return the steam regulator to the
in order to prevent any leaks.
• The device must never be immersed in water!
GB
Model: .........................................................................................................................DB 761 K
Power supply:................................................................................................. 220-240 V, 50 Hz
Power consumption:.......................................................................................................2200 W
Protection class:........................................................................................................................ Ι
This device has been tested according to all relevant current CE guidelines, such as electro-
magnetic compatibility and low voltage directives, and has been constructed in accordance
with the latest safety regulations.
Subject to technical changes without prior notice!
46
05-DB 761 K 46

Cleaning and Storage

„ " position after use and empty the water tank

Technical Data

28.04.2006, 12:41:31 Uhr