Product Description And Specifications - Bosch GSR 140-LI Originalbetriebsanleitung

OBJ_BUCH-2945-001.book Page 14 Thursday, September 15, 2016 8:36 AM
14 | English
 Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Technical Data
Cordless Screwdriver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Impact rate
Max. torque for soft screw-
driving application according
to ISO 5393
Maximum torque, hard screw-
driving application according
to ISO 5393
*depending on the battery pack being used
** limited performance at temperatures <0 °C
1 609 92A 34L | (15.9.16)
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramics and plastic.
GSB machines are additionally intended for impact drilling in
bricks, brickwork and masonry.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Tool holder
2 Keyless chuck
3 Torque presetting ring
4 Mode selector switch(GSB 140-LI, GSB 180-LI)
5 Gear selector
6 Cover lid
7 Battery pack
8 Battery unlocking button
9 Worklight
10 Rotational direction switch
11 On/Off switch
12 Handle (insulated gripping surface)
13 Universal bit holder*
14 Carbon brushes
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GSR 140-LI
3 601 JF8 0..
V= 14,4
-1
min 0-450
-1
min 0-1700
-1
min –
*
Nm 18
*
Nm 50
GSR 180-LI GSB 140-LI
3 601 JF8 1.. 3 601 JF8 2..
18 14,4
0-450 0-450
0-1700 0-1700
– 0-27 000
*
21 18
*
54 50
GSB 180-LI
3 601 JF8 3..
18
0-450
0-1700
0-27 000
* *
21
* *
54
Bosch Power Tools