Noise/Vibration Information - Bosch GSR 140-LI Originalbetriebsanleitung

OBJ_BUCH-2945-001.book Page 15 Thursday, September 15, 2016 8:36 AM
Cordless Screwdriver
Maximum drilling diameter
(1st/2nd gear)
– Wood
– Steel
– Brickwork
Tool holder
Max. screw dia.
Weight according to EPTA-
Procedure 01:2014
Permitted ambient
temperature
– during charging
– during operation
**
and
during storage
Recommended batteries
Recommended chargers
Recommended chargers for
wireless charging batteries
*depending on the battery pack being used
** limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to EN 60745-2-1, EN 60745-2-2.
GSR 140-LI / GSB 140-LI
Typically the A-weighted noise levels of the product are: Sound pressure level 89 dB(A); Sound power level 100 dB(A). Uncer-
tainty K=3 dB.
Wear hearing protection!
GSR 180-LI / GSB 180-LI
Typically the A-weighted noise levels of the product are: Sound pressure level 88 dB(A); Sound power level 99 dB(A). Uncer-
tainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum)
h
and uncertainty K determined according to
EN 60745-2-1, EN 60745-2-2.
Drilling in metal:
a
h
K
Impact drilling in concrete:
a
h
K
Screwdriving:
a
h
K
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
Bosch Power Tools
GSR 140-LI
mm 32
mm 10
mm –
1.5 - 13
mm 8
kg 1.3/1.5*
°C -15... +50
°C -20... +50
GBA 14,4V..
GBA 18V... W
AL 1814 CV
GSR 140-LI
2
m/s <2.5
2
m/s
2
m/s
2
m/s
2
m/s <2.5
2
m/s
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
GSR 180-LI GSB 140-LI
35 32
10 10
– 8
1.5 - 13 1.5 - 13
10 8
1.3/1.6* 1.3/1.6*
-15... +50 -15... +50
-20... +50 -20... +50
GBA 18V.. GBA 14,4V..
AL 1814 CV AL 1814 CV
GAL 18... W
GSR 180-LI GSB 140-LI
2.5
1.5 1.5
– –
– –
<2.5
1.5 1.5
English | 15
GSB 180-LI
35
10
10
1.5 - 13
10
1.3/1.6*
-15... +50
-20... +50
GBA 18V..
GBA 18V... W
AL 1814 CV
GAL 18... W
GSB 180-LI
<2.5 2.5
1.5 1.5
7.0 8.0
1.5 1.5
<2.5 <2.5
1.5 1.5
1 609 92A 34L | (15.9.16)