Before Fi Rst Use; Low-Acrylamide Cooking - Silvercrest SEF 2300 A1 Bedienungsanleitung

WARNING! RISK OF FIRE!
Do not use the appliance near hot surfaces.
►
Never leave the appliance unattended while it is being used.
►
Caution! Hot surface!
NEVER use water to extinguish a fi re in the deep fat fryer!
Old or dirty fats and oils can spontaneously ignite if overheated.
►
Change the oils or fats regularly. In the case of a fi re, remove the
plug from the mains power socket and smother the burning fat or
oil with a damp towel or fi re blanket.
CAUTION – APPLIANCE DAMAGE!
When fi lling the stainless steel container with fat, NEVER fi ll it
►
to above the MAX marking or to below the MIN marking. First
ensure that there is suffi cient oil or fat in the deep fat fryer every
time you intend to switch the appliance on.
NEVER switch the appliance on if there is no oil or liquid fat in it.
►
This deep fat fryer is suitable only for frying foodstuff s.
►
It is not designed for cooking liquids.
Before fi rst use
1) Before you use the deep fat fryer for the fi rst time please clean all individual com-
ponents thoroughly and carefully dry them (see Chapter "Cleaning and Care").

Low-acrylamide cooking

Acrylamide is a possibly carcinogenic substance formed from a reaction with
amino acids when frying foodstuff s with a high starch content. The formation of
acrylamide increases rapidly at temperatures of more than 175°C.
You should therefore avoid frying foodstuff s with a high starch content, for
example chips, at temperatures above 170°C. The foodstuff s should only be
fried to golden-yellow, instead of dark or brown. This is the only way to achieve
low-acrylamide cooking.
SEF 2300 A1
GB
IE
7