Use Of Analogue Clock/Programmer - Candy F 112 Bedienungsanleitung

USE OF ANALOGUE CLOCK/PROGRAMMER

SETTING THE CORRECT TIME
To set the correct time pull and turn the knob 1 until the clock
shows the correct time. Once this is done release the
control 1.
FUNCTION HOW TO ACTIVATE IT HOW TO SWITCH IT OFF
•Turn the control knob 1
until the blue hand C is
on the required time.
MINUTE MINDER
• Max 55 minutes
• Turn the control knob 2
MANUAL
clockwise until the symbol
FUNCTION
appears in the window
(E)
• First of all select the
cooking function and the
temperature required
• Set the length of
COOKING
cooking required by turning
TIME
the control knob 2
clockwise until the time
matches the length of time
shown in the window (E)
• The oven will start
immediately and it will
switch off automatically at
the end of the preset time
• Max time 180 minutes
(3 hours)
• First of all select the
cooking function and the
temperature required.
• Prior to selecting the
END OF
cooking
COOKING
start time ensure that the
symbol
the window (E)
• To set the cooking start
time pull and turn the
control knob 2 either
clockwise or anticlockwise
until the hand F is in the
position indicating the
start time required.
• To set the length of
cooking required turn the
control knob 2 until the
time required appears in
the window (E).
Red hand (F)
(start of cooking time)
(E)
• When the set time has
elapsed an alarm will
sound for approx 3
minutes.
• To stop the alarm turn the
control 1 until the Blue
hand C is on the
symbol
• Turn the oven function
selector to position O.
• At the end of the set
time the oven switches off
automatically, this is
indicated by an audible
alarm, this will ring for
approx. 3 minutes
• To cancel the setting and
or the alarm, turn the
control knob 2 until the
symbol
in the window (E)
• At the end of the cooking
time set, the oven will
switch off automatically
and an audible alarm
will ring for approx. 3
minutes
is showing in • To cancel the set function
line up the clock hand (F)
with the hour hand (G) and
proceed by turning the
control knob 2 clockwise
until the symbol
appears in the window (E)
- Pull and turn the control
knob 2 to line up the hand
(F) with the clock hour
hand
• The alarm can be stopped
by turning the control knob
2 until the symbol
appears in the window (E)
2.
1.
Blue hand (C)
ATTENTION : the oven only operates if set on manual function
or preset time.
WHAT IT DOES
• Sounds an alarm at the
end of the set time.
• To check how long is
left to run press the
button
• Enables you to operate
the oven.
• It allows you to preset the
cooking time required for
the recipe chosen.
appears
• Enables you to set the end
of cooking time
11 GB
WHAT IT IS FOR
• Allows to use the oven as
alarm clock (could be
activated either with
operating the oven or
with out operating the
oven)
• For cooking the desired
recipes
• At the end of the cooking
time set, the oven will
switch off automatically
and an audible alarm will
ring.
• This function is typically
used with "cooking time"
function. For example
if the dish has to be cooked
for 45 minutes and needs
to be ready by 12:30,
simply select the required
function, set the cooking
time to 45 minutes and the
end of cooking time to
12:30.
• Cooking will start automa-
tically at 11:45 (12:30
minus 45 mins) and will
continue until the pre-set
end-of-cooking-time, when
the oven will switch itself
off automatically.
WARNING.
If the END of cooking is
selected without setting
the length of cooking time,
the oven will start cooking
immediately and it will
stop at the END of
cooking time set.