Use; Control Panel - Smeg KSEV 96 X 1 Bedienungsanleitung

USE

L Light
S1 Led
S2 Led
M Motor
V1 Speed
V2 Speed
V3 Intensive
Speed
R Receiver for
Remote Control
GB

Control panel

R L
Switches the lighting system on and off.
Motor running led.
It flashes once after 100 working hours of the hood to indicate that the grease
filters need washing.
It flashes twice after 200 working hours to indicate that the grease filters need
washing and that the anti-odour charcoal filters, if any, need changing.
Intensive speed led.
Switches the extractor motor on and off at low speed. Used to provide a contin-
uos and silent air change in the presence of light cooking vapours.
When the Hood is in ELC (Electronic Comfort) mode, the button will not
only turn the Ducting motor on, but will also disable this function.
Reduces the operating speed.
When the button is pressed with the Motor off, ELC (Electronic Comfort)
mode will be enabled again, giving a continuous, low noise flow of air. Press
the button and hold it until Led S1 flashes slowly.
Increases the operating speed.
Maximum speed, used for eliminating the highest cooking vapour emission.
Switches off automatically after 10 minutes operation. Can also be switched
off manually by pressing the button.
Optional Remote Control.
S1 S2
V3
M V1 V2
17