Trimming The Quadrocopter - Carrera Rc 370503016 Montage- Und Betriebsanleitung

"PICT0000.jpg" in the file folder "Photo". The
photos are JPG files – a standard format for
photos. If you should unintentionally delete ei-
ther file "Video" or "Photo", it will be recreated
on the next application in the Quadrocopter.
Automatic control of altitude
14 The Quadrocopter will maintain the current
flying altitude automatically as soon as you
release the left-hand joystick during the flight.
Auto Landing
15 You can trigger the automatic landing func-
tion at any time by means of pressing the
'Auto landing' button. The speed of the ro-
tors will reduce gradually as a result. You
are able to influence the landing position at
any time during the landing procedure by
means of moving the right-hand joystick.
The motor will switch itself off as soon as
the Quadrocopter is on the ground.
Auto-Start & Fly to 1.5m
16 Press the 'Auto-start & fly to 1.5 m' button on
the controller, in order to start the motors and
automatically fly up to the altitude of about
1.5 m . You are able to influence the direction
of flight at any time during the starting oper-
ation by means of moving the right joystick.
The Quadrocopter will maintain itself in posi-
tion automatically as soon as the altitude of
about 1.5 m has been reached.

Trimming the Quadrocopter

Auto-trimming
17
1. Place the Quadrocopter on a hori-
zontal surface.
2. Link the Quadrocopter with the con-
troller as described in "Linking the
model with the controller".
3. Slide the gas lever and the lever for for-
ward / back simultaneously into the right
lower corner. The LED on the Quadro-
copter flashes on briefly and then lights
up continuously. The signalling tone will
sound once.
4. The neutral setting is completed.
18
When hovering, if the Quadrocopter flies
to the left or right without you moving the
lever for left / right movement, please pro-
ceed as follows: If the Quadrocopter
moves on its own fast or slow sideways to
the left, press the lower right trimmer for
right / left tilt in steps to the right. If the
Quadrocopter moves right, press the trim-
mer for right / left tilt in steps to the left.
19 When hovering, if the Quadrocopter flies for-
wards or backwards without you moving the
lever for forwards or backwards movement,
please proceed as follows: If the Quadrocop-
ter moves on its own fast or slow forwards,
press the upper right trimmer for forwards /
backwards in steps downwards. If the Quad-
rocopter moves backwards, press the trimmer
for forwards / backwards in steps upwards.
20 When hovering and without you moving the
lever for circling on the spot, if the quadrocop-
ter rotates to left or right, proceed as follows:
If the quadrocopter rotates quickly or slowly
to the left around its own axis, press the trim-
mer for rotation below left in steps to the right.
If the quadrocopter rotates to the right, press
the trimmer for rotation in steps to the left.
Changing the rotor blades
21
Use a smooth narrow object to help draw
off a rotor blade if necessary. Make sure
that you draw the rotor blade with great
care vertically upwards, and hold the mo-
tor from below to stabilise it.
22 QR code for motor-change system,
spare parts and further information.
WARNING!
23
Be sure to note the marking and colour,
also the tilt angle of the rotor blades!
Front left: red – marking "B"
Front right: red – marking "A"
Rear right: black – marking "B"
Rear left: black – marking "A"
23
ENGLISH