Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
I n t e n t o f U s e
The pneumatic 0753 MkII type tool is designed to place Avdel
line assembly in a wide variety of applications throughout all industries.
The Hand Tool and Intensifier have been tested as separate items and combined. They must only be used together and for no other
purposes. Refer to "Putting into Service" on page 8 for connection details.
Both models, the 07530 MkII and 07532 MkII are hand-held lightweight tools. Their only difference lies in the location of the hose entry.
The top entry on the 07532 MkII tool allows suspension from an added mounting plate, see drawing opposite. Part numbers are shown
to order a complete tool including the intensifier and all hoses but no nose equipment.
The pistol number for the 07530 MkII model is 07530-02200 and is 07532-02200 for the 07532 MkII model. See the general
assemblies on pages 28-31.
Both models will place the same fasteners and both will place most repetition fasteners, as shown in the table below.
Both models make use of the same nose equipment. Reference must be made to the Nose Equipment section of the manual when
selecting compatible components for the type and size of fastener used in your application (see pages 13-21). Nose jaw dimensions
are shown on page 14.
FASTENER NAME
3 /32"
CHOBERT
®
GROVIT
®
AVLUG
®
BRIV
®
RIVSCREW
®
AVTRONIC
®
AVSERT
®
6
®
1 /8"
5 /32"
3 /16"
●
●
●
●
●
●
●
●
●
●
●
●
●
●
1
speed fasteners (except
/
" Avlug
16
FASTENER SIZE
2.5mm
1 /4"
3mm
3.5mm
2.8mm
●
●
●
●
®
) making it ideal for batch or flow-
M2.5
6mm
4mm
4-40
UNC
●
●
●
●
M3
6-32
UNC
●
Werbung
Kapitel
Inhaltsverzeichnis
