KERN RXB-BA-def-0911 Betriebsanleitung Seite 47

Procedure when adjusting:
Attention:
In calibrated balances the adjustment function is switch locked.
To carry out calibrations, you will have to throw the unlock switch (See chpt. 11.1).
Observe stable environmental conditions. A warming up time of ca. 30 minutes is
required for stabilization. Ensure that there are no objects on the weighing plate.
• Activate the calibrating function F3 in the menu (See chpt. 10)
Weight
F3
• Press
-key, the following display will appear:
Weight
0,000
• Ensure that there are no objects on the weighing plate.
• Operate menu activation key (10.1); stop check is carried out, then the weight
value of the calibrating weight will appear on the weight display
Weight
3.000
(maximum load)
• Carefully place adjusting weight in the centre of the weighing plate
• Operate menu activation key (see chap. 10.1)
Weight
CAL.
• While the balance is counting down to zero, remove the adjusting weight.
• The balance returns automatically into weighing mode. An error message will
appear on the display should a adjustment error occur or should the
adjustment weight be incorrect. Turn balance off, then restart it and repeat the
adjustment process.
Notice: Again throw the verification switch for calibrated balances.
RXB-BA-e-0911
Basic price
WIDE
Basic price
kg
Basic price
Kg
(weighing unit)
Basic price
done
Sales price
CAL.
Sales price
XXXXXX
(internal value)
Sales price
XXXXXX
(internal value)
Sales price
21