Changing The Light Bulb - AEG DI 8820 Benutzerinformation

Warning
• Failure to observe the instructions on cleaning the unit and changing
the filters will cause a fire hazard. You are therefore strongly
recommended to follow these instructions.
• The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.

Changing the light bulb

• Disconnect the cooker hood from the mains supply.
Prior to touching the light bulbs ensure they are cooled down.
• Remove the lamp cover carefully, use a screw driver as a
lever. Fig. 6.
• Replace the old bulb with a new one of the same type.
• Refit the lamp cover.
• If the light does not come on, make sure the bulb has been inserted
in correctly before contacting your local Service Force Centre.
66
Fig. 6