Warning; Changing The Light Bulb(S) - AEG DK 4490 Benutzerinformation

Warning

• Failure to observe the instructions on cleaning the unit and changing
the filters will cause a fire hazard. You are therefore strongly recom-
mended to follow these instructions.
• The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.

Changing the light bulb(s)

• Disconnect the cooker hood from the mains supply.
• Prior to touching the light bulbs ensure they have cooled
down.
• Remove the damaged lamp.
• Replace the old bulb with a new one of the same type.
• If the light does not come on, make sure the bulb has been inserted
in correctly before contacting your local Service Force Centre.
64