Description Of The Appliance; Extraction Mode; Recirculation Mode - AEG DI 8820 Benutzerinformation

Description of the Appliance

• The cooker hood is designed to extract unpleasant odours
from the kitchen, it will not extract steam.
• The hood is supplied as an extractor unit and can also be used with
a recirculation mode by fitting a charcoal filter.
• You will need an original charcoal filter for this function (Available
from your local Service Force Centre).
• Only for HI 8820: The cooker hood is
supplied ready for use as a recirculation
hood and may be used for extraction by
removing the charcoal filter which has
been fitted inside the cooker hood.

Extraction mode

• In this mode fumes are extracted to the
outside via a hose connected to the
coupling ring A. Fig. 1.
• In order to obtain the best performance
the hose should have a diameter equal
to the outlet hole.
• Should there already be a pipe of
diameter 125 or 120 mm that ducts to
the outside through the walls, it is possible to use the 150/125-120
mm reduction flange provided. In this case the hood will be slightly
noisier.

Recirculation mode

• The air is filtered
through a charcoal
filter and returned to
the kitchen.
• You will need an
original charcoal
filter for the
recirculation mode.
(See Special
Accessories).
• Fix the deflector
using 4 screws Ø
3.5x6.5 mm. Fig. 2.
Fig. 1
F
Fig. 2
A
61