Copying Image Data From The Digital Video Camera To The Computer; Copying Print Frame Images From The Computer To The Digital Video Camera - JVC GR-DV2000A USB CONNECTION KIT Bedienungsanleitung

12
EN
Copying Image Data from the Digital
Video Camera to the Computer
For details on the basic operation of Mac, refer to
the instruction manual provided with your Mac.
Preparation
Start Macintosh.
● Insert the memory card into the camera. Make
sure in advance that the memory card contains
data which you want to copy onto the Mac.
1
Turn the Power dial on the camera to "
2
Press the "MEMORY PLAY" button on the
camera.
3
Connect the camera to the computer using
the provided USB cable. (
•"USB MODE" appears on the LCD panel.
4
Confirm the "untitled" icon appears on the
desktop.
•If the camera is connected to the computer
properly, the "untitled" icon appears.
5
Double click the "untitled" icon and copy the
desired files from the still image data folder.
NOTES:
● After the data has been copied, drop the "untitled" icon in the trash and disconnect the USB cable.
● Always initialize a Memory Card (a MultiMediaCard or an SD Memory Card) before using it with the
digital video camera. (For details on the initialization procedure, refer to the digital video camera's
manual.)
If the camera is connected to a personal computer through the USB interface, there are circumstances in
which it might not be possible to read or write files.
● When a file is being accessed from a personal computer, the message "ACCESSING FILE" is displayed on
the LCD panel on the camera. Never disconnect the USB cable while this message is displayed.
● Disconnect the USB cable and then turn the computer off or operate the Power dial on the camera.
SECTION FOR Macintosh (cont.)
".
pg. 10)
Copying Print Frame Images from the
Computer to the Digital Video Camera
For details on the basic operation of Mac, refer to
the instruction manual provided with your Mac.
Preparation
Start Macintosh.
● Insert the memory card into the camera.
1
Turn the Power dial on the camera to "
2
Press the "MEMORY PLAY" button on the
camera.
3
Connect the camera to the computer using
the provided USB cable. (
•"USB MODE" appears on the LCD panel.
4
Confirm the "untitled" icon appears on the
desktop.
•If the camera is connected to the computer
properly, the "untitled" icon appears.
5
Copy the desired files from the "TITLES"
folder on the provided CD-ROM to "untitled"
icon.
•For details on the print frame image, see
page 14 – 15.
•To copy all of the images, copy the "TITLES"
folder (38 images) from the CD-ROM to the
memory card in the camera.
•To copy only some of the images, create a
New Folder named "TITLES" in the memory
card in the camera and then copy just the
images that you want into the folder.
".
pg. 10)