geo-FENNEL FL 40-3Liner Bedienungsanleitung Seite 10

EN
B
FEATURES
1. ON / OFF laser lines
2. ON / OFF pulse function (use with receiver)
3. Base (transport lock)
4. Battery compartment cover
5. Keypad
6. Laser emitting windows
5
6
C
OPERATION
• Set up the tripod / wall mount of the instrument
a) onto a builder's tripod or floor-to-ceiling pillar (5/8" thread)
b) on a wall: there are three screw eyes on the mount with which the unit can be fixed.
• Switch the laser on on: ON <- -> OFF
Turn the base (3) in position „ON" (position „OFF" = shut off the unit).
• Set the instrument into the tripod / wall mount. A visual alarm (blinking lines) indicates if the
instrument was set up outside of the compensator range of ± 3,5°. Set up the instrument on a more
even surface.
• Switch on the laser lines by pressing switch 1.
10
4
3
1
2