Yamaha Soavo-3 Bedienungsanleitung Seite 5

<Bi-wired connections>
Before connecting the speaker cable, you must remove the jumper cable.
To connect the speaker to the
output terminals of the amplifier,
two pairs of cables for each of the
woofer and the tweeter are used
instead of standard connections.
This type of connection decreases
the modulation distortion caused by
electric resistance of the cables and
driving current of the speakers.
Consequently, purer sound quality
can be expected.
When using a banana plug
1
Unscrew the terminal knob.
2
Remove the cover by pulling it toward you.
When your amplifier has only one
set of speaker output terminals.
Amplifier
Soavo-3 (R) Soavo-3 (L)
Before connecting the speaker
cable, you must remove the
jumper cable.
Black (–)
Jumper
cable
2
1
When your amplifier has two sets
of speaker output terminals.
Soavo-3 (R)
Mid-range terminals
Woofer terminals
3
Tighten the terminal knob.
4
Simply insert the banana plug into the terminal.
4
Banana plug
Both SPEAKERS A and
B should be connected.
Amplifier
Soavo-3 (L)
Tweeter/
Red (+)
3
4
En