Specifications; Specific Safety Rules - Makita BHP440 Betriebsanleitung

ENGLISH
1. Battery cartridge
2. Button
3. Red part
4. Switch trigger
5. Lamp
6. Reversing switch lever
7. Speed change lever
8. Adjusting ring

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute (min
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
4
Explanation of general view
9. Action mode changing ring
10. Arrow
11. Graduations
12. Sleeve
13. Screw
14. Hook
15. Groove
16. Blow-out bulb
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
-1
)
Low (1)
High (2)
-1
)
Low (1)
Overall length
Net weight
Rated voltage
17. Limit mark
18. Rear cover
19. Screws
20. Spring
21. Arm
22. Recesed part
23. Carbon brush cap
24. Hole
BHP440
ø 6.8 mm x 50 mm
0 - 21,000
1.7 kg
D.C. 14.4 V

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to ham-
mer drill safety rules. If you use this power tool
unsafely or incorrectly, you can suffer serious per-
sonal injury.
1. Wear ear protectors with impact drills. Exposure to
noise can cause hearing loss.
2. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
3. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high loca-
tions.
4. Hold the tool firmly with both hands.
5. Keep hands away from rotating parts.
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Do not touch the bit or the workpiece immediately
after operation; they may be extremely hot and
could burn your skin.
BHP450
13 mm
13 mm
27 mm
M6
0 - 1,400
0 - 400
0 - 6,000
204 mm
1.8 kg
D.C. 18 V