Hama TS36E Bedienungsanleitung Seite 9

• We recommend installing the measuring
station securely on an outdoor wall.
• Install an anchor, screw, nail, etc. in the
wall of your choice.
• Hang the measuring station using the
opening intended for this purpose (4).
6. Operation
6.1. Connection to the measuring
station
• To connect the base station and the
measuring station, place the two devices
as close together as possible.
• After you insert the batteries, the base
station automatically searches for a
connection to the measuring station and
performs initial setup.
• If the device does not connect
automatically, the manual search
program on the base station must be
started.
• Initial setup takes approximately
3 minutes.
• During the connection attempt, the
radio symbol and the LED indicator
(1) on the measuring station
will flash.
• Do not press any buttons during
setup. Otherwise, values may not be
transmitted correctly and there is a
risk of value errors and inaccuracies.
Note
7