Spotify - Kenwood LW H-A – Serie Bedienungsanleitung

CD/USB/iPod/ANDROID
Settings to use KENWOOD Remote application
KENWOOD Remote application is designed to control the KENWOOD car
receiver's operations from the iPhone/iPod (via USB input terminal).
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting. For more information, visit <www.kenwood.com/cs/ce/>.
You can make the settings in the same way as connection via Bluetooth.
( 20, 21)
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
USB
MUSIC DRIVE DRIVE CHANGE: The next drive ([DRIVE 1] to [DRIVE 4]) is selected
automatically and playback starts.
1 3
Repeat steps to to select the following drives.
SKIP SEARCH 0.5%/1%/5%/10%: While listening to iPod 1, iPod 2, ANDROID 1 or
ANDROID 2 source, selects the skip search ratio over the total files.

Spotify

Preparation:
Install the latest version of the Spotify application on your device (iPhone/
iPod touch), then create and account and log in to Spotify.
• Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 5)
Start listening
1 Open the Spotify application on your device.
2 Connect your device to the USB input terminal.
.
Default: XX
3
Press
Broadcast starts automatically.
* 1
KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
* 2
Do not leave the cable inside the car when not using.
USB 1 cable from the
KCA-iP102/KCA-iP103 (optional
rear of the unit.
accessory) *
iPod/iPhone *
You can also connect to the USB 2 cable
from the rear of the unit.
repeatedly to select SPOTIFY 1/SPOTIFY 2.
1
or accessory of the
2
13
ENGLISH