Building-In - ZANKER ZKH 7629 Bedienungsanleitung

Electrolux
Electrical connection with the hob
This oven can be connected to hobs indicated in
the paragraph "Technical data". The socket for
connecting the hob is located at the top of the oven
cabinet. The hobs come complete with connecting
leads for the hot plates/heat areas and ground
cable; these leads feature plug-in connectors.
Connection of the hob to the oven is carried out by
plugging-in these connectors to the corresponding
oven socket.
The plug-to-socket connection design is such as to
prevent possible wrong plugging-ins.
The Manufacturer disclaims any liability in
case these accident-preventing rules are not
observed.

Building-in

To ensure correct operation of the built-in assembly,
the kitchen cabinet and the recess for the built-in
appliance must have suitable dimensions. When the
appliance is fitted-in, there must be no open spaces
left and it must be closed on all sides by the kitchen
furniture to prevent the possibility of inadvertently
touching "live" (current carrying) parts of the oven.
All parts ensuring such a protection, including any
covering panel (for instance, if the appliance is
installed at the end or at the beginning of a kitchen
counter) must be fastened in such a way as to
prevent removal of the same without the aid of some
tool. This appliance can be placed with its back and
with one side close to appliances or walls of higher
Fig. 40
height. The other side, instead, must be placed close
to furniture or appliances, having the same height.
Overall oven dimensions (Fig. 40)
Building-in under a kitchen counter
The recess must have the dimensions shown in
Fig. 41.
Fig. 41
36