Antari S-120 Bedienungsanleitung Seite 2

Antari S-100 Snow Machine & S-120 Foam Machine
Introduction
Thank you for choosing an ANTARI Special Effects Machine. You now own a rugged
and powerful state-of-the-art machine. Prior to use, we suggest that you carefully
read all of the instructions. By following the suggestions found in this user manual,
you can look forward to the reliable and satisfactory performance of your ANTARI
Snow or Foam Machine for years to come.
Please follow these operation, safety and maintenance instructions to ensure a
long and safe life for both the snow and foam machines.
Cautions
♦ Keep this device dry.
♦ For inside use only. Not designed for outside use.
♦ For the 110V models, use 3-prong grounded electrical outlet only. Prior to use
take care to determine that the unit is installed at the rated voltage.
♦ Always unplug your ANTARI Snow or Foam Machine before filling its tank.
♦ Keep both the snow machine and foam machine upright.
♦ Turn off or unplug when not in use.
♦ This machine is not water- or splash-proof. If moisture, water, or snow/foam
liquid gets inside the housing, immediately unplug the unit and contact a service
technician or your ANTARI dealer before using it again.
♦ There are no user serviceable parts inside. Refer to your ANTARI dealer or other
qualified service personnel.
♦ For adult use only. These machines must be installed out of the reach of children.
Never leave the unit running unattended.
♦ Never aim the output nozzle directly at people.
♦ Locate the machine in a well-ventilated area. Never cover the unit's vents. In
order to guarantee adequate ventilation, allow a free air space of at least 20 cm
around the sides and top of the unit.
♦ Never add flammable liquids of any kind (oil, gas, perfume) to the snow liquid.
Pay attention to all warning labels and instructions printed on the exterior of your
♦ Use only the high-quality snow liquid or foam liquid that your dealer recommends.
♦ Always make sure there is sufficient liquid in the machine's liquid tank.
♦ If your ANTARI machine fails to work properly, discontinue use immediately.
Drain all liquid from the tank, pack the unit securely (preferably in the original
packing material), and return it to your ANTARI dealer for service.
Unpacking & Inspection
Open the shipping carton and verify that all equipment necessary to operate the
system has arrived intact. The S-100 should come with the snow machine, remote
Danger of electric shock
Danger of explosion
ANTARI Snow or Foam Machine
2