10. Setting the Transmitter Channels
4 transmitting channels can be set for each transmitter. The channel settings at the transmitters
and at the receiver must be identical.
a) Microphone
• Switch off the microphone (push switch downwards).
• Screw off the casing bottom of the microphone
• Set the transmission channel at the microphone to the desired channel (0-3) with the DIP switches.
• Set the same channel at the receiver with the buttons 8 2 (4) or (6). The channel or the frequency is
displayed on the display (5).
• The display at the receiver can be switched with the CH/FREQ (3) button between the frequency display
and the channel display.
b) Bodypack (only item no. 1268716)
• Switch the body pack on (push button POWER/MUTE (2) briefly).
• Set the desired transmitter channel with the buttons 4 or 6 (5).
• Set the same channel at the receiver with the buttons 8 2 (4) or (6). The channel or the frequency is
displayed on the display (5).
• The display at the receiver can be switched with the CH/FREQ (3) button between the frequency display
and the channel display.
29