Bresser 60 Bedienungsanleitung Seite 17

Now, you turn to the telescope tube
and fi nd the following pieces:
Telescope tube
Finderscope
Finderscope holder
Vertical adjustment
zenith mirror
eyepiece extenders and screws
Eyepieces
Spiral screws and Washers
b
First, you need to fi x connect the fi nderscope
to the fi nderscope holder (insert and tighten
with three screws).
c
You will notice three threads protruding from
the telescope tube. Here, you can attach the
holder with the fi nderscope.
d
Next, screw the vertical fi ne adjustment to
the protruding silver metal supports on the
telescope tube.
E
Now it's going to get diffi cult! It is best if you
let someone help you. You need to attach the
telescope tube to the tripod. To do so, take
the spiral screw with the washers and screw
the tube to the tripod head.
GB
17