Location Of Controls - auna Quarz 150 Bedienungsanleitung

1. LCD Display 1. LCD Display
2. 2. /STANDBY Button /STANDBY Button
3. ALARM Button 3. ALARM Button
4. DOWN Button
5. SLEEP Button
6. UP Button
7. SNOOZE Button
8. LEFT Button
9. MUTE Button
10. RIGHT Button
11. PRESET Button
12. VOLUME / SELECT Button
13. HOME Button
14. Speaker
15. FM Antenna
16. DC Jack
17. AUX IN Jack
18. Earphone Jack
Connecting power supply
Insert the AC adapter into a 220V AC ~ 50Hz mains outlet and the other end of the cord into the DC 7.5V jack on
the back of the unit.
Caution: Use only the main adaptor supplied with the radio. Connecting a power supply with a diff erent rating will
cause permanent damage to the radio and may be hazardous.
Connecting to the network
As soon as the power supply is connected, the display will light up and show:
Welcome
Connecting to Network
After a few seconds, the display will show:
Would you like to
confi gure Network now?
YES Yes(WPS)
If your Wi-Fi is using WPA protection or no protection at all, select "Yes" by pushing the VOLUME / SELECT jog dial.
The radio will search for WiFi-networks automatically.
Scanning for
Wireless Network
The radio will now list all WiFi-networks it can fi nd. You can scroll through the list by using the VOLUME / SELECT
jogdial. Choose the WiFi-network you want to use by pushing the VOLUME / SELECT button.
If your network is protected, the radio may request you to enter the correct WPA (Wi-Fi Protected Access) code.
Enter Password

Location of Controls

Operating Instructions
NO
10