Maintenance - auna Quarz 150 Bedienungsanleitung

6.5 Language
Choose the desired language from the list (1. English, 2. German, 3. French, 4. Dutch, 5. Russian, 6. Norwegian, 7.
Danish)
6.6 Dimmer
Configure the brightness of the display:
• for Power Saving mode
• for the Default Setting
6.7 Power Management
You can set a period of time after which the radio will turn off automatically (5, 15, 30 minutes).
6.8 Sleep Timer
You can set a period of time after which the radio will go standby automatically (15, 30, 60, 90, 120, 150, 180 minutes).
6.9 Buffer
Buffer time for internet radio (2, 4, 8 seconds).
6.10 Weather
The weather forecast can be shown on the display in standby mode. Furthermore, you can set the temperature
unit and your location.
6.11 FM setup
Select a "Mode" (Mono/Stereo) and your "Area" (Japan/others).
6.12 Local Radio Setup
• Manual Setup: Radio stations from all over the world can be selected.
• Auto Detect: The radio will detect local stations of your region automatically.
6.13 Playback Setup
Select playback modes for UPnP-playback: Repeat All, Repeat one and Shuffle.
6.14 Equalizer
Depending on what kind of radio station you are listening to, you can choose from different EQ modes (Normal,
Flat, Jazz, Rock, Movie, Classical, Pop, News).
6.15 Resume When Power On
After being turned on, the radio will resume playing the most recent radio station.
6.16 Software Update
In case upgrades are available, upgrade information will be displayed on the display.
6.17 Reset to default
Reset in order to restore the device to factory default settings.
To clean the casing, unplug the unit and wipe off dust and stains with a soft, damp cloth. Do not use ben-
zene, thinner or other similar chemicals to clean the casing.

Maintenance

14