Saving The Parameter Adjustment Data; Setup With Pactware™ And Other Adjustment Programs; Connecting The Pc; Parameter Adjustment With Pactware - VEGA VEGASON S 61 Betriebsanleitung

5.6 Saving the parameter adjustment
data
It is recommended noting the adjusted data, e.g. in
this operating instructions manual and archive
them afterwards. They are hence available for
multiple use or service purposes.
If VEGASON S 61 is equipped with an indicating
and adjustment module, the most important data
can be read out of the sensor into indicating and
adjustment module. The procedure is described in
the operating instructions manual "Indicating and
adjustment module" in the menu item "Copy sensor
data". The data remain there permanently even if
the sensor power supply fails.
If it is necessary to exchange VEGASON S 61, the
indicating and adjustment module is inserted into
the replacement instrument and the data are
written into the sensor under the menu item "Copy
sensor data".
6 Setup with PACTware™ and
other adjustment programs

6.1 Connecting the PC

Connecting the PC directly to the sensor
1
Fig. 28: Connection directly to the sensor
1 USB cable
2 VEGASON S 61
3 Voltage supply
Necessary components:
VEGASON S 61
Setup with PACTware™ and other adjustment programs
VEGASON S 61
l
PC with PACTware™ and suitable VEGA DTM
l
VEGACONNECT 4
l
Power supply unit
l
6.2 Parameter adjustment with
PACTware™
Further setup steps are described in the operating
instructions manual "DTM Collection/PACTware™"
attached to each CD and which can also be
downloaded from our homepage. A detailed
description is available in the online help of
PACTware™ and the VEGA DTMs.
loads" to the item "Software".
7 Maintenance and fault
rectification

7.1 Maintenance

When used as directed in normal operation,
2
VEGASON S 61 is completely maintenance free.

7.2 Remove interferences

Causes of malfunction
VEGASON S 61 offers maximum reliability.
Nevertheless, faults can occur during operation.
These may be caused by the following, e.g.:
Sensor
l
Process
l
Supply
l
Signal processing
l
Note:
Keep in mind that for setup of VEGASON S
61, DTM-Collection 06/2003 or a newer
version must be used.
All currently available VEGA DTMs are
provided in the DTM Collection on CD and
can be obtained from the responsible
VEGA agency for a token fee. This CD
includes also the up-to-date PACTware™
version. The basic version of this DTM
Collection incl. PACTware™ is also avail-
able as a free-of-charge download from the
Internet.Go via www.vega.com and "Down-
35