Dvb-T / T2 (Terrestrial Search) - Megasat 2600012 Bedienungsanleitung

5. DVB-T / T2 (Terrestrial search)

Wählen Sie mit den pq Tasten den
Menüpunkt Terrestrisch aus und bestäti-
gen Sie mit OK. Anschließend gelangen
Sie zu weiteren Untermenüs:
• Measure
• Auto Scan
• Spectrum
• Scope
• RF Channel list
• Settings
5.1 Measure
The meter shows the following values
during the live signal:
•
The lock status. The
signal is locking if the
icon is green or the
color of the icon is red.
• C04-C68 Channel selection
• 0 V
Antenna voltage
(0 V / 5 V / 12 V)
• DVB-T/T2 Measurement of DVB-T
or DVB-T2. Use the t u keys to switch between the two variants.
• FREQ
The current frequency. Press t u to change the frequency
or press OK to edit it.
• BW
The bandwidth of the live signal. Press t u to switch between 6M,
7M and 8M.
• SNR
The signal noise rate value of the live signal.
• CBER
The CBER (BER before FEC) value of the live signal.
• LBER
The LBER (BER before FEC) value of the live signal.
• POWER
The power level value of the live signal.
• Str
The strength of the live signal in percent.
• Qlt
The quality of the live signal in percent.
16
ENGLISH