Megasat 2600012 Bedienungsanleitung Seite 31

2. Descriptions and key assignment
1. LNB In
2. ANT In
3. LCD Display
4.
5.
6.
7. Funktionstasten
8. Navigation
9. Menu
10. OK
11. Power
12. DC
13. Reset
Satellite signal input (DVB-S)
Antenna signal input (DVB-T or DVB-C)
Show the Menu
Red: the battery is being charged / Blue: battery is full.
The light will blink once the antenna connects shortly.
Power indicator: Indicate the device is power on or off.
F1: Adjust the brightness of the screen
F2: Activates / deactivates the key tones
(DVB-S: Measurement of consumption / supply voltage)
F3: Function key in various menus
(DVB-S: Transponder Control / measure the levels)
(DVB-S/-T/-C: Selection of the spectrum measuring range)
F4: (DVB-S: Auto DiSEqC Function)
Note: The functions of the F-keys depend on the sub-menu
you are. (See point 11: Power button)
pq Navigation through the menu / channge values
t u Navigation through the menu / channge values
Enter or exit main menu.
In the menu, press OK to confirm selection.
Turn the unit on or off. Press and hold the switch for 2
seconds to turn the unit on. Press the switch briefly to display
the functions of the F keys on the screen.
Connect with the charger cord for charging the equipment.
Reset the device to factory settings.
ENGLISH
05