AEG 47036IU Benutzerhandbuch Seite 36

36 www.aeg.com
comes on
comes on
comes on
comes on
comes on
and number come on
come on
Problem Possible cause
The automatic switch-off
operates
Overheating protection
for the cooking zone op-
erates
No cookware on the
cooking zone
Not correct cookware
The diameter of the bot-
tom of the cookware is
too small for the cooking
zone
There is an error in the
appliance
There is an error in the
appliance, because a
cookware boils dry or you
use not correct cookware.
Overheating protection
for the cooking zone op-
erates. The automatic
switch-off operates
Remedy
Stop the appliance and
start it again
Switch off the cooking
zone. Switch on the cook-
ing zone again
Put cookware on the
cooking zone
Use the correct cookware
Move cookware to a
smaller cooking zone
Disconnect the appliance
from the electrical supply
for some time. Discon-
nect the fuse from the
electrical system of the
house. Connect again. If
comes on again,
speak to the After Sales
Service
Switch off the appliance.
Remove the hot cook-
ware. After approximately
30 seconds switch on the
cooking zone again.
should disappear, residu-
al heat indicator can stay.
Cool down the cookware
and check it with the sec-
tion Cookware for the in-
duction cooking zone