13
OPERATION
Device to be operated in a perfect state only. Inspect the device visually every time it is to be used.
Check in particular the safety equipment, electrical controls, electric cables and screwed connection
for damage and if tightened properly. Replace any damaged parts before operating the device.
13.1
Operation instructions
Never remove the battery while the machine is running
Use branch saw only with enough saw oil!
Operate the machine when pole mounted always with shoulder strap!
In dangerous situations detach the machine with the quick release from
shoulder strap
13.2
Operation
13.2.1 Trimmer
Trimmer head angle adjustment:
Press angle adjustment (A) and turn the trimmer head in
desired position.
Tilt range -20 to 60°
Release angle adjustment an let the trimmer head lock
Extension pole length adjustment:
Turn the length adjustment (A) anticlockwise to open the
locking mechanism.
Adjust the desired length.
Turn the length adjustment clockwise to fix the length
setting
Shoulder strap:
Lay shoulder strap over
one shoulder and adjust
the length.
The machine can be
detached from the
shoulder by pressing the
quick release
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-GPS40V-AKKU
W A R N I N G
Unplug battery before all maintenance and settings!
N O T I C E
OPERATION
40