Assembly; Trimmer - Zipper Maschinen ZI-GPS40V-AKKU Betriebsanleitung

12

ASSEMBLY

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore
12.1 Assembly
Assembly handle:
Place handle on the desired position on the pole
and fix with 4 screws.

12.1.1 Trimmer

Assembly guard:
Insert guard (A) to the
slots of the motor housing
(B) and slide into place.
Fix with two screws (C).
Remove the plastic cover from the line blade (D)
and remove the plastic tags from each end of the
cutting line (E) before first operating.
Assembly trimmer head:
Unlock lock lever (B).
Insert the trimmer head (A) to the slots and slide
into place until the operating handle locks into
place.
Lock with lock lever (B)
Remove trimmer head:
Unlock lock lever (B).
Slide out the trimmer head (A).
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-GPS40V-AKKU
ASSEMBLY
35