Cleaning And Maintenance - Eurolite Led Qdf-4 Rgbw Dmx Bedienungsanleitung

137-142 all green and all white
143-148 all blue and all white
149-154 group 1 of blue and all white
155-160 group 2 of blue and all red
161-172 group 3 of blue and green
167-172 group 1 of blue and group 3 of red
173-178 group 2 of blue and group 2 of red
179-184 group 3 of blue and group 1 of red
185-190 group 1 of green and group 3 of white
191-196 group 2 of green and group 2 of white
197-202 group 3 of green and group 1 of white
group 1 of blue, group 3 of green,
203-208
group 1 of red, and group 3 of white
group 2 blue, group 2 of green, group
209-214
2 of red, and group 2 of white
group 3 of blue, group 1 of green,
215-220
group 3 of red, group 1 of white
221-255 all white, all red, all green and all blue
Channel 5 – Strobe
Value:
000 – 010
011 - 255
Channel 6 – Internal Programs, Auto Mode, Sound Controlled Mode
Value:
000 – 010
011 – 036
037 – 062
063 – 088
098 – 114
115 – 130
131 – 156
157 – 182
183 – 208
209 – 250
251 – 255

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
Function:
Off
Flash, with increasing speed
Function:
Off
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
Auto Mode: Internal programs
Sound Controlled Mode
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
24/25 00039785.DOC, Version 1.2