Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DEVICE DESCRIPTION
Features
DMX LED spotlight set for easy mobile color creativity!
Complete LED light set consisting of 4 LED spots and a crossbar with an integrated DMX control unit and
mounting hole (36 mm) with fixation screw for installation on a truss system or speaker stand • Addressing
and setting via control panel with 4-digit LED display and three operating buttons • Pivotable and tiltable
spotlights • Each spot can be individually controlled via DMX • DMX-512 control via regular DMX-controller
(occupies 6 channels) • Sound-control via built-in microphone with sensitivity control • Strobe effect • Auto
mode • Internal programs • Master/Slave function • Equipped with 228 x 5 mm LEDs • Ultra-light ideally
suited for mobile use • Suited for installation on a speaker stand (not included) • Comes pre-assembled with
practical transport bag • Black lacquered metal version • Ready for connection via IEC power cord with
safety plug
Overview
1
F
a
B
www.eurolite.de
MADE IN CHINA
1. Fixation screws for mounting via theatre hooks
2. Jack for remote control EUROLITE RC-2 (not included in delivery)
3. Sensitivity control
4. DMX In
5. DMX Out
6. Microphone
7. Control panel with 4-digit LED display and three operating buttons
8. Mounting hole (36 mm) with fixation screw for speaker stand installation
9. Fuse
10. Power supply
11. Fixation screws for hanging bracket fixation (pivoting range)
12. Fixation screws for spot fixation (tilt angle)
INSTALLATION
Mounting on a speaker system stand
All devices, lighting effects and crossbeams attached on a stand must be secured with a secondary
attachment!
First install the LED QDF-Bar on the tube via the mounting hole and tighten the fixation screw.
2
3
4
5
6
7
Sensitivity
8
9
10
Fuse: F 2 A, 250 V
11
12
20/29
1
00054291.DOC, Version 1.2
Werbung
Inhaltsverzeichnis
