Cleaning And Maintenance - Philips Satinelle ICE HP6483 Bedienungsanleitung

EnglisH
1

cleaning and maintenance

Never rinse the adapter or the appliance itself with water.
Do not use any corrosive detergents, scouring pads or cloths, petrol,
acetone etc. to clean the appliance.
cleaning the cooling glove
1 Make sure the appliance is switched off and unplugged.
 Remove the ice gel pad from the cooling glove.
 Clean the cooling glove with a moist cloth after each use.
Make sure the outside of the ice gel pad is completely dry before
you freeze it again.
cleaning the epilating head
1 Make sure the appliance is switched off and unplugged.
 Remove the epilating head (Fig. 1).
Press the release button (1) and pull the epilating head off the appliance
(2).
 Clean the epilating head, including the epilating discs and the plastic
housing, with the cleaning brush (Fig. 17).
 For thorough cleaning, you can remove the massaging
element (Fig. 1).
5 You can also rinse the epilating head (not the appliance!) under the
tap to clean it more thoroughly (Fig. 19).
Never try to detach the epilating discs from the epilating head.
6 Place the epilating head on the appliance and press it onto the
appliance until it snaps home ('click') (Fig. 0).
The epilating head only fits onto the appliance in one way.
cleaning the sensitive area cap
You can rinse the sensitive area cap under the tap.