Cleaning And Maintenance - Philips Satinelle Ice HP6496 Bedienungsanleitung

6 Place the shaving head onto your skin and move the appliance
slowly and smoothly against the direction of hair growth. Press the
appliance lightly. (Fig. 1)

cleaning and maintenance

Never rinse the adapter or the appliance itself with water.
Do not use any corrosive detergents, scouring pads or cloths, petrol,
acetone etc. to clean the appliance.
1 Make sure the appliance is switched off and unplugged.
 Remove the skin cooler from the appliance and slide the insulating
sleeve off the skin cooler.
 Clean the pivoting cooling head of the leg skin cooler with the
brush supplied or with a moist cloth after each use.
Make sure the outside of the skin cooler is completely dry before
you freeze it again.
cleaning the epilating head
1 Remove the epilating head. (Fig. 11)
Press the release button (1) and move the epilating head in the direction
of the arrow (2).
 Clean all accessible parts and the epilating discs with the brush.
(Fig. 1)
 For thorough cleaning, remove the massaging element. (Fig. 15)
 To clean the epilating head (not the appliance!) more thoroughly,
rinse it under the tap. (Fig. 16)
Never try to detach the epilating discs from the epilating head.
5 Place the epilating head on the appliance and press it onto the
appliance until it snaps home ('click'). (Fig. 17)
The epilating head only fits onto the appliance in one way.
EnglisH
11