Setting The Operation Mode; Dmx Mode (3 Optional Modes); Stand Alone Mode - EuroLite 51915420 Bedienungsanleitung

Setting the operation mode

Press MODE to select an operating mode: DMX, Preset Mode, Auto Mode, Manual Mode.

DMX mode (3 optional modes)

In DMX-mode, you can either select between 3 modes. Use UP or DOWN to switch the desired mode.
3 channel mode (R, G, B control – 4 spots form a group)
CH CH CH
1 2 3
red green blue
6 channel mode (R, G, B control –2 spots form a group)
CH CH CH
1 2 3
red green blue
12 channel mode (R, G, B control – per spot)
CH CH CH
1 2 3
red green blue

Stand Alone mode

In the Stand Alone mode, the LED PSU-24V DC can be used without DMX controller.
Browse through the menu by pressing Mode. Press the Set-button in order to select the desired submenu.
You can change the selection by pressing Up or Down. You can leave every mode by pressing the Mode-
button.
Preset Mode
Under this point of the menu, you can select the static colors: red, green, blue, cyan, magenta, yellow and
white.
Auto Mode
Under this point of the menu, you can set the color change (Switch Color) and the fade speed (Fade Color),
you can select one of 20 internal programs and you can switch on/off the sound-control. Furthermore you
can select the desired microphone sensitivity (So.00 = sound-control off; So.01 – So.FL = setting the desired
microphone sensitivity).
Manual Mode
Under this point of the menu, you can set the RGB-values manually.
Reset
Under this point of the menu, you can restore the factory settings of the device.
Select "LoAd" by pressing Mode. Press Set to confirm; the display shows "C-00". Press Up (step of 10) and
Down (step of 1) to select "C-32". Press Set to confirm. The display shortly indicates "8.8.8.8" followed by "-
.-.-.-". All settings will be set back to the default values.
CH CH
4 5
red green
CH CH CH CH
4 5 6
red green blue red
CH
6
blue
CH CH CH
7 8 9 10
green blue red
21/22
CH CH
11 12
green blue
00043178.DOC, Version 1.2