Start-Up; Mounting The Monitor Stand; Preparations On Your Computer; Supported Monitor Settings - Medion MD 31119 Bedienungsanleitung

Start-Up

Note
Before start-up always read the Chapter "Safety and Precautions" on page 2ff.

Mounting the Monitor Stand

Mount the monitor stand as shown in the diagram. Perform this step before connecting the monitor.

Preparations on Your Computer

If you have operated your computer previously with a CRT monitor, it will be necessary for you to make a few
preparations. This is required when your previous monitor was operated with settings which are not supported by
your new TFT monitor.

Supported Monitor Settings

This TFT monitor supports the following modes:
Resolution
720 x 400
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1440 x 900*
1280 x 720
1680 x 1050
(Ill.: Mounting the monitor stand)
Horizontal Frequency
31.47 KHz
31.47 KHz
37.86 KHz
37.5 KHz
37.88 KHz
48.08 KHz
46.87 KHz
48.36 KHz
56.48 KHz
60.02 KHz
63.98 KHz
80.00 KHz
55.47 KHz
60.00 KHz
64.67 KHz
Start-Up
Vertical Frequency
70 Hz
60 Hz
72.8 Hz
75 Hz
60.3 Hz
72.2 Hz
75 Hz
60 Hz
70.1 Hz
75 Hz
60.02 Hz
75 Hz
59.90 Hz
75 Hz
60Hz
*recommended physical resolution
7