Inhaltsverzeichnis
Werbung
SPROCKETS INSPECTION/
DRIVE CHAIN INSPECTION
SPROCKETS INSPECTION
1. Inspect:
Sprocket teeth a
G
Excessive wear → Replace.
NOTE:
Replace the drive sprocket, rear wheel
sprocket and drive chain as a set.
5PA30480
DRIVE CHAIN INSPECTION
1. Measure:
Drive chain length (15 links) a
G
Out of limit → Replace.
NOTE:
5PA30510
While measuring the drive chain length, push
G
down on the drive chain to increase its ten-
sion.
Measure the length between drive chain
G
roller 1 and F as shown.
Perform this measurement at two or three
G
different places.
2. Remove:
Master link clip
G
Joint 1
G
Drive chain 2
G
5PA30490
3. Clean:
Drive chain
G
Place it in kerosene, and brush off as much
dirt as possible. Then remove the chain
from the kerosene and dry the chain.
5PA30500
3 - 22
INSP
ADJ
Drive chain length (15 links):
<Limit>: 194.3 mm (7.65 in)
Werbung
Inhaltsverzeichnis
