Z Preparation; Z Opening The Loading Door; Z Selecting The Wash Programme; Z Selecting Additional Programmes - Schulthess Spirit topLine 7540i Bedienungsanleitung

Consumption values
The consumption values and programme durations given
are approximate values which were determined under
stan dard conditions. Fluctuations of up to 10% are pos-
si ble.
Reduced mains connection
On machines with reduced mains connection, the
pro gramme times will be extended accordingly.
Hot water supply
In the case of washing machines with a hot water supply,
the following points should be noted:
The max. permissible hot water temperature is 70°C.
 For prewash, delicates programmes and programmes
≤ 30°C only cold water is used.
 In the temperature range ≥ 40°C, the water is mixed
automatically to the programmed washing temperature.
 In the case or textiles soiled with blood or proteins,
select a programme with prewash so that the stains will
be washed out below 30°C to ensure that they cannot
become fixed to the fabric at higher temperatures in the
main washing cycle.
Washing
Preparation
Check that:
X the pump cover is screwed on (see chapter «Cleaning
and Maintenance»)
X the mains plug or the wall switch is turned on.
X the water tap is turned on.
The machine is ready for use when all pilot lamps are
flashing or are switched off in standby mode.
Opening the loading door
X Press the «Open door» button.
 The loading door springs open.
X Note: The loading door only springs open if the main
power supply is switched on.
Selecting the wash programme
X Press the programme button
 The control light for the selected programme lights up.
 The display shows the wash temperature, the selected
programme and the programme duration.
40
Backward in steps
X During entry it is possible to move backward in the
programme in steps using the button back.
Selecting additional programmes
X Press the desired selector button (see chapter «Addi-
tional program mes»).
 The text for the selected additional programme
appears on the display.
Selecting additional functions
 After programme selection, various additional functions
can be selected.
X Press button «Next in programme selection»
 The display will show the possible settings (see chapter
«Additional functions»).
 The displayed values can be changed and/ or selected
using the selector buttons.
Adding laundry
X Weight measurement of the laundry will only work
properly, if the wash programme has been selected
before loading the laundry.
X Place the laundry loosely in the drum, small and large
pieces mixed together.
Closing the door
X Close the door by pushing it until the lock audibly
engages.
X Ensure that no items of laundry are trapped between
the door and the rubber seal.
If the door is not closed, a safety switch prevents the
machine from starting.
.