First-time use
Install the machine according to the installation instructions.
First wash cycle (without laundry)
Run the first wash cycle without laundry, to remove any
water remaining from the manufacturing process.
1.
Check that the transport packaging on the rear of the
machine has been removed (see installation instructions).
2.
Turn on the water supply.
3.
Pull out the detergent drawer until it reaches its stop.
4.
Add half a scoop of all purpose detergent to chamber II
(on the left).
Do not use gentle or wool detergent, because it will
produce too much foam.
5.
Select the washing programme «Coloureds 60 °C»
6.
Press the Start button. The programme should start.
7.
After the end of the programme, the machine is ready
for use.
38