Installation; Electrical Connection - IFM Electronic efector 500 PN3 Bedienungsanleitung

Rise time for the switching output; damping:
Time between the change in the system pressure and the change
in the switching status. Only pressure changes > dAP are evalua-
ted. Pressure peaks of short duration or high frequency can thus
be filtered out.
• indicated in ms
• the value for dAP defines the switching frequency (f) of the
output:
dAP
f [Hz]

4. Installation

Mount the pressure sensor on a suitable process connection (see type
label "Port Size").

5. Electrical connection

The unit must only be connected by an electrician.
The national and international regulations for the installation of
electrical equipment must be observed.
Voltage supply to EN50178, SELV, PELV.
Protect the unit from electrostatic discharge and spikes.
Disconnect power before connecting the unit.
Wiring:
Core colours of ifm sockets:
1 = BN (brown), 2 = WH (white),
3 = BU (blue), 4 = BK (black).
18
3 6
170 80
1
BN
L +
2
WH
4
BK
3
BU
L
10 17 30
50 30 16
60 125 250
8 4 2
500
1