Function And Features - IFM Electronic efector 500 PN3 Bedienungsanleitung

1. Function and features

• The pressure sensor detects the system pressure,
• indicates the current system pressure by a 7 segment LED display,
• converts the system pressure into an analog output signal
• and generates an output signal according to the set switch
function: hysteresis function, window function, as N.O. or as N.C.
Applications:
Order no.
PN3xx0
PN3xx1
PN3xx2
PN3xx3
PN3xx4
PN3xx6
PN3xx7
Avoid static and dynamic overpressure exceeding the given over-
load pressure.
Even if the bursting pressure is exceeded only for a short time
the unit can be destroyed (danger of injuries)!
Indication of the current system pressure as from 3% of the
value of the measuring range. Display "0" does not mean that
the system is free of pressure!
14
Measuring
range
0 ... 400 bar
0 ... 250 bar
0 ... 100 bar
0 ... 25 bar
0 ... 10 bar
0 ... 2.5 bar
0 ... 1 bar
Permissible
overl. pressure
600 bar
400 bar
300 bar
100 bar
50 bar
20 bar
10 bar
Bursting
pressure
1000 bar
850 bar
650 bar
350 bar
150 bar
50 bar
30 bar